I am OPEN and READY for your business!!!! Woo Hoo!!

Scooby

Scooby

The Lawn Mower Repairman!!
With the rain, things have slowed enough for me to get all my ducks in a row. The shop is VERY NICE, plenty of room and I am about 90% organized, so don't hesitate to call me if you need repairs. I am in full repair mode now, and I can also get you parts for those who do their own work, within a day's notice.

Riding mowers, walk behinds, all 2-cycle equipment (leaf blowers, edgers, trimmers, etc.) I am fully stocked and ready to provide you folks with high quality and super fast service!! I also still have some used and rebuilt equipment if you're on a tight budget (and who aint in this day and time?
wink.gif
).

I do not have the bonafide address but if you paste in this address: 1612 Rosedale Dr, Hiram, GA 30141 it will show you EXACTLY where I am located now. I have 1,000 bizz cards that should be ready tomorrow if I can scratch up the balance to pay for them, and they have the exact address. In the meantime, you can copy and paste in the address above to easily find us.

PLEASE CALL before coming by though, so I know that someone will be there to check you in or out. I still have to make 1-2 trips a day back and forth from home to continue moving equipment from my home base to the new shop. Hours are 11 a.m. until 5 p.m. for now, Mon-Fri (some Saturdays, depending on my band schedule for the weekends). Just drop me a line or email at:

glennsmowerrepair@comcast.net But it is still faster to just call. I am looking into how much I'll need to get internet service at the shop, hopefully by mid next week.

But I am open for business and ready to service my local community. So, don't be a stranger and come see me!!
smile.gif


Glenn's Mower & Small Engine Repair
Glenn ---- 678-315-8794 or
Daniel ---- 470-2589447
 
I wish you much success in your new business. If you were in Richmond you would have our business. :thumbsup
 
You need to make a banner we can load on the board :DN

I'm glad to hear you're set up, Glen! 8)
 
Grey Colson said:
You need to make a banner we can load on the board :DN

I'm glad to hear you're set up, Glen! 8)
Click to expand...

I spoke with Guard Dad about that. I am going to make one this evening....who do I send it too?
 
Scooby said:
Grey Colson said:
You need to make a banner we can load on the board :DN

I'm glad to hear you're set up, Glen! 8)
Click to expand...

I spoke with Guard Dad about that. I am going to make one this evening....who do I send it too?
Click to expand...

Send it to rolltide. He'll try to hook it up for you as time permits ;D
 
If you're where I think you are, you just replaced the RH transmission on my cub cadet ZT. If you did, it works great and I'd be glad to give you a positive referral. We cut 55 vacant lots and 15 house lots the week after we picked it up.
 
J-man said:
If you're where I think you are, you just replaced the RH transmission on my cub cadet ZT. If you did, it works great and I'd be glad to give you a positive referral. We cut 55 vacant lots and 15 house lots the week after we picked it up.
Click to expand...

That would be me! Glad to hear it's working out for you. Operations have changed dramatically since I took the reins...I don't waste time. I get it done right away and expect to have it picked up and payed for within 3 days or less. A lot of of my long time customers make their livings from their equipment, as i make my living from repairing them....so I get them in and out as quickly as possible so we both can go on making our money asap. My helper and I cleared out a shop full of unfinished equipment that had been sitting for months within less than 1 week. Not counting your Cub, we repaired at least 5 mowers within 2 hours that had been sitting in there for a LONG time.

This is my operation, and I conduct business the same way I did from my home...a repair shop for people who rely on their equipment for their bread and butter. What was (in my opinion) a storage facility is now a repair shop that wastes NO TIME in getting things in and out asap. I personally oversee all repairs to ensure everything is done correctly, and my helper has been trained by me, personally. No more games or him-hawing around. This is how I make my living and I take everything very seriously, so I can tell you without a doubt, you are in good hands. My turn around time is usually less than 24 hours. All I ask from my customers is that they pick up and pay as fast as I perform the repair work. ;)

Yall need your machines to make a living and I need to eat, myself, so this is now one very tight ship. No more delays you may have experienced in the past. I run this thing the same way I ran my own shop from home- get it in and get it out. I would appreciate it if you could send me your name and contact number and I will change your world in how business should be done....to your satisfaction, of course. ;) I am all about making your life easier and providing you with the best quality and super FAST service. You would probably be surprised at the prices I charge compared to what you have been paying so far. This is my only way of making a living, and it depends solely on making you happy with the rates I charge and most of all, very quick turn around time, while insuring you the best workmanship you'll find anywhere else. :)

Glenn's Mower & Small Engine Repair

Glenn
678-315-8794
 
You hit the nail on the head, I'm looking for quick turn-a-round when our equipment is down. Unnecessary down time is unacceptable and I'm looking for a service center which will give me quick service and I'm willing to pay a premium for it. That part was a major item, not something readily kept on hand, so I expected a delay. The important thing is that once the part was in, the repair was quick and done correctly the first time. I'll send my info to you in a pm. Thanks again.
 
J-man said:
You hit the nail on the head, I'm looking for quick turn-a-round when our equipment is down. Unnecessary down time is unacceptable and I'm looking for a service center which will give me quick service and I'm willing to pay a premium for it. That part was a major item, not something readily kept on hand, so I expected a delay. The important thing is that once the part was in, the repair was quick and done correctly the first time. I'll send my info to you in a pm. Thanks again.
Click to expand...

As soon as that tranny hit the shop we were on it immediately. You can expect very quick turn around. I serviced more than a few landscaping companies when I worked from home. We basically stopped everything and took those guys in right off the bat. The charge is a little higher, but I can get you back to work in no time flat. ;) I sent you a PM telling you to send me an email so i can get you in my contact list.
 
Whoa Willie said:
Good deal Man. The mower I bought from you still cranks on the first pull.
Click to expand...

That's what I like to hear! Hope you've been doing well, buddy. Drop in and see me sometime.
 
You must log in or register to reply here.
Back
Top